fipyMultiPack3
FiPy LoRa Sigfox LTE-M Development Board TopFiPy LoRa Sigfox LTE-M Development Board BottompytrackSideJunepytrackTopJuneLTE-M cellular AntennaLoRa Sigfox LPWAN Antenna Kit

FiPy Pytrack Bundle

97.11

The FiPy Pytrack Bundle features the FiPy, the only 5-network (WiFi, BLE, LoRa, Sigfox and LTE-M) and MicroPython combo micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 SoC, the FiPy offers a perfect combination of power, friendliness and flexibility. Also included in this bundle is the the LoRa/Sigfox Antenna, LTE-M Antenna and the Pytrack, a sensor shield which you can use with any of your Pycom multi-network modules and contains a number of sensors.

Create and connect your things everywhere. Fast.

Available on back-order

Product Description

Note: This is to preorder for shipping end of July 2017

The FiPy Pytrack Bundle features the FiPy, the only 5-network (WiFi, BLE, LoRa, Sigfox and LTE-M) and MicroPython combo microcontroller on the market today – the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 SoC, the FiPy offers a perfect combination of power, friendliness and flexibility. Also included in this bundle is the the LoRa/Sigfox Antenna, LTE-M Antenna and the Pytrack (GPS), a sensor shield which you can use with any of your Pycom multi-network modules and contains a number of sensors.

Create and connect your things everywhere. Fast.

Pytrack

Imagine 5 networks in one perfectly-formed, same-small-foot-print-as-WiPy- LoPy-and SiPy, IoT development board. MicroPython enabled. FiPy includes WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT M1 and NBIoT) the FiPy gives access to all the world’s LPWAN networks on one tiny board.

Get on with a board that gives you full flexibility during testing, install, deployment and even later when you want to switch real-time your airtime network provider. You can switch when the time is right for you or set some parameters that will do so automatically.

FiPy Features

– Powerful CPu
– Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1, LoRa and Sigfox
– 1KM WiFi range
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: a fraction compared to other connected microcontrollers

Processing

– Espressif ESP32 SoC
– Dual processor and WiFi radio system on chip
– Networking processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Interfaces

– 2 x UART, 2 x SPI, I2C, micro SD card
– ANalog channels: 8×12 bit ADCs, 2×8 bit DAC
– Timers: 2×64 bit with PWM with up to 16 channels
– DMA on all peripherals
– GPIO: Up to 22

Hash / Encryption

SHA, MD5, DES, AES

WiFi Networking

802.11b/b/n 16mbps

Bluetooth

Low energy and classic

RTC

Running at 32KHz

Range

Node range: Up to 50km

Security & Certifications

– SSL/TLS support up to 1.2
– WPA Enterprise security
– AES encryption engine

Memory

– RAM: 4MB
– Flash Memory: 8MB
– GPIO: Up to 22
– Hardware floating point acceleration
– Python multi-threading

Power

– Voltage Input: 3.3V – 5.5V
– 3v3 output capable of sourcing up to 400mA

Sigfox Operating Frequencies

RCZ1 – 868MHz(Europe)

RCZ2 – 902MHz (US, Canada and Mexico)

RCZ3 – (Japan and Korea)

RCZ4 – 920-922MHz (ANZ, Latin America and S-E Asia)

Sigfox Specification

– TI CC1125NarrowbandTransceiver

– Class 0 device. Maximum Tx power:

  • – +14dBm (Europe)
  • – +22dBm (America)
  • – +22dBm (Australia and New Zealand)

– Node range: Up to 50km

– Sigfox pre-certified (October 2016)

– Power

  • – Sigfox (Europe): 17mA in Rx mode, 47mA in Tx mode and 0.5uA in standby
  • – Sigfox (Australia, New Zealand and South America):
  • 24mA in rX mode, 257 mA in Tx mode and 0.5uA in standby

Bluetooth Networking

– Low energy and classic

– Compliant with Bluetooth v4.2 BR/EDR and BLE specification

– Class-1, Class-2 and Class-3 transmitter without external power amplifer

– Enhanced power control

– +10dBm transmitting power

– NZIF receiver with -98 dBm sensitivity

– Adaptive Frequency Hopping (AFH)

– Standard HCI based on SDIO/SPI/UART

– High speed UART HCI, up to 4 Mbps

– BT 4.2 controller and host stack

– Service Discover Protocol (SDP)

– General Access Profile (GAP)

– Security Manage Protocol (SMP)

– Bluetooth Low Energy (BLE)

– ATT/GATT

– HID

– All GATT-based profile supported

– SPP-Like GATT-based profile

-BLE Beacon

-A2DP/AVRCP/SPP, HSP/HFP, RFCOMM

– CVSD and SBC for audio codec

– Bluetooth Piconet and Scatternet

LoRa Operating Frequencies

– 868MHz(Europe) at +14dBm maximum

– 915MHz (North and South America, Australia and New Zealand) at +20dBm maximum

LoRa Specification

– Power consumption: 10mA Rx, 28mA Tx

– LoRaWAN stack – Class A and C devices

– Node range: Up to 40km

– Nano-gateway: Up to 22km (Capacity up to 100 nodes)

LTE-M Operating Frequencies

– 34 bands supports from 699Mhz to 2690Mhz (Total world-wide support)

LTE-M Specification

– One single chip for both CAT M1 and NB1 (yes, only one chip)

– 3GPP release 13 LTE Advanced Pro

– Supports narrowband LTE UE categories M1/NB1

– Integrated baseband, RF, RAM memory and power management

– Reduced Tx power class option

– Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt

– Data rates:

  • – 300 kbps DL
  • – 375 kbps UL (LTE Cat M1 in 1.4 Mhz, HD-FDD)
  • – 40 kbps DL
  • – 55 kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)

Tx/Rx Frequencies

Ports for LTE Bands
Tx frequencies
Rx frequencies
Low bands 5, 8, 12, 13, 18, 19, 20, 28
699 to 915 MHz
729 to 960 MHz
Mid bands 1, 2, 3, 4
1710 to 1980MHz
1805 to 2170 MHz

WiFi Networking

– Up to 1km range

– 802.11b/g/n 16mbps

– Power: 12mA in active mode, 5uA in standby

Size

55m x 20mm x 3.5mm (Without Headers)

Weight

– 7g
– 31g (Packaged)

Pytrack

Imagine a sensor shield which you can use with any of your Pycom multi-network modules! This is what we give you with Pysense and Pytrack – a leg up to get you off to a great start really quickly.

Pytrack Features

– Super accurate GNSS + Glonass GPS
– 3 axis 12-bit accelerometer
– USB port with serial access
– LiPo battery charger
– MicroSD ard compatibility
– Ultra low power operation (~1uA in deep sleep)

Location Services Supported

– GPS
– GLONASS
– Galileo
– QZSS

Use with Pybytes

Crafted by a group of Pycom back-end experts, the Pybytes platform will be everything there needs to be in place to gather, organise and display your data free of charge in the cloud. Regardless of whether you are a company, IoT system architect or an ambitious tech hobbyist we’ll soon have you connected.

Size

55m x 35mm x 10mm

Weight

11g (Standalone)

LTE-M Antenna

External LTE-M Antenna Kit for use with the FiPy and GPy development boards.

Specification

– Lte band 28/38*2
– Frequency: 703~803/2520~2620(MHz)
– Antenna size: 75 x 21 (mm)
– PCB 0.6 mm

Low bands

– (5, 8, 12, 13, 18, 19, 20, 28)
– Tx frequencies 699 to 915 MHz
– Rx frequencies 729 to 960 MHz

Mid bands

– (1, 2, 3, 4)
– Tx frequencies 1710 to 1980MHz
– Rx frequencies 1805 to 2170 MHz

LoRa / Sigfox Antenna Kit

This universal LoRa & Sigfox Antenna Kit can be used with either the LoPy or the SiPy triple network IoT Development boards.

The LoRa & Sigfox Antenna Kit Includes

– External antenna.

– RF Cable Assemblies RP-SMA (Female) JK-IPEX MHF U.FL 1.13 100MM

– RP-SMA (Male) Tilt Swivel 1/2 Wave Whip antenna

NOTE: Using a LoRa or Sigfox radio on LoPy or SiPy without the external antenna can lead to damage of the device and is therefore not recommended. So, if it’s not this one, please make sure you get one somewhere else.

NOTE: For waterproofing please also order the special IP67 antenna connector cable.

Additional Information

Weight 0.2 kg