GPy – Pre-order for shipping May 2017


With WiFi, BLE and cellular LTE-CAT M1/NB1, the GPy is the latest Pycom triple-bearer MicroPython enabled micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast.

Available on back-order

Product Description

Get on with a board that gets you into the newly available LTE-M networks. The GPy gives you full flexibility during testing, install, deployment and is delivered RCM, IC, CE and FCC certified.

At a glance
• 3 networks: WiFi, BLE and cellular LTE-CATM1/M2(NBIoT)
• Small form factor, same footprint as other Pycom boards
• Micropython enabled
• Pymakr and Pymate compatible
• All your apps from WiPy, LoPy and SiPy will work on FiPy too
Open source firmware

LTE-M Specification
One single chip for both CAT M1 and NB1 (yes, only one chip)
3GPP release 13 LTE Advanced Pro
Supports narrowband LTE UE categories M1/NB1
Integrated baseband, RF, RAM memory and power management
Reduced Tx power class op on
Peak power estimations: TX current = 420mA peak @1.5Wa RX current = 330mA peak @1.2Wa
Data rates:
– 300 kbps DL
– 375 kbps UL (LTE Cat M1 in 1.4 Mhz, HD-FDD)
– 40 kbps DL
– 55 kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)

GPy will be certified on the various mobile networks as and when they roll out.

Check out our Getting Started Pages                      Return to Shop

Additional Information


7 g


55 x 20 x 12 mm