W01 WiFi OEM Module
W01 WiFi OEM Module bottom

W01 OEM Module

7.958.95

The W01 is the WiPy OEM module. It’s going to work exactly like your WiPy but we’ve trimmed a few bits to make it smaller and easier to integrate. Dual network BLE and WiFi.

Clear

Product Description

The W01 is the WiPy OEM module. It’s going to work exactly like your WiPy but we’ve trimmed a few bits to make it smaller and easier to integrate. Dual network BLE and WiFi.

Fits on the Pycom OEM Reference Board.

 

Drawings and reference design

  • The drawings can be found here.
  • The reference design is available here.

Not included in W01

– Voltage regulator
– Reverse power supply protection
– Antenna switch
– SMD antenna
– u.fl connectors
– Reset switch
– LED
– Headers
– A few passive components

You will be given full technical support to design-in / integrate the module onto your product PCB.

Nothing else changes and the good thing is that you’ll be able to use the same applications on your W01 and on your WiPy which makes everything a doddle. Supplied in high volume assembly format (with SMT pads).

There’s no packaging to unwrap. The W01 can be supplied and used straight from a hermetically sealed reel. It’s the ideal solution for high volume deployments. it comes CE, FCC, IC and RCM certified.

First batch shipping: 2nd June 2017
Whilst Pycom plans carefully to ensure modules are always in stock, in the eventuality of these being “Out-Of-Stock”, then deliveries will be circa 8-12 weeks from order receipt.

PLEASE NOTE: Current discounted pricing for low volumes will cease 31st August 2017. New pricing will apply thereafter.

Contact us on [email protected] for more details

W01 Features

– Powerful CPU, BLE and state of the art WiFi radio.

– 1KM Wifi Range

– MicroPython enabled

– Fits on the Pycom OEM Reference Board.

– Ultra-low power usage: a fraction compared to other connected micro controllers

Processing

– Espressif ESP32 chipset

– Dual processor + WiFi radio System on Chip

– Network processor handles the WiFi connectivity and the IPv6 stack

– Main processor is entirely free to run the user application

– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Interfaces

– 2 x UART, 2 x SPI, I2C, I2S, micro SD card

– Analog channels: 8×12 bit ADCs

– Timers: 4×16 bit with PWM and input capture

– DMA on all peripherals

GPIO: Up to 24

Hash / encryption

SHA, MD5, DES, AES

WiFi

802.11b/g/n 16mbps

Bluetooth

Low energy and classic

RTC

Running at 32KHz

Power

Voltage Input: 3.3V regulated

Security & Certifications

– SSL/TLS support

– WPA Enterprise security

– FCC – 2AJMTW01XXX

– CE 0700

Memory

– RAM: 4MB

– Flash Memory: 8MB

– Hardware floating point acceleration

– Python multi-threading

You may also like…